Tough Devices
Home » Cat S61 Review, Spec’s sheet and Price.

Cat S61 Review, Spec’s sheet and Price.

Cat S61 Review, Spec’s sheet and Price.

Cat S61 Features

  • Leading rugged credentials
    • Aluminum reinforced die-cast frame
    • MIL Spec 810G
    • Built to survive repeated drop tests onto concrete from 1.8m
    • IP68 dustproof and waterproof, tested in water up to 3m deep for 1 hour
    • Screen protected by the latest Corning® Gorilla® Glass 5
  • FLIR Thermal camera: Lepton
    • Increase measurable scene temperature range -20°C to 400°C
    • Enhanced MyFLIR app with Live Streaming of thermal images
    • Improved FLIR MSX image resolution
  • Laser-assisted area and distance measurement, up to 8m
  • VOC indoor air quality meter and humidity sensor
  • Android™ Oreo (with upgrade to P)
  • 5.2” FHD bright display, optimized for outdoor use
    • Touch screen can be controlled with gloves on or with wet fingers
  • Large 4500mAh capacity battery, QC4.0 compatible
  • 16MP rear camera, 8MP front camera, 4K video
  • 4GB RAM, 64GB ROM (expandable with MicroSD)
  • 2.2GHz Octa-core processor (Qualcomm Snapdragon 630)
  • LTE Cat 13, VoLTE, VoWiFi
  • Enhanced GPS, BT5.0, NFC, dual band WiFi (2.4GHz/5GHz)
  • Curated app catalog for rugged device users


You can find a pdf version of the S61 – Spec Sheet


Check Price on Amazon


Is this the most advanced rugged phone Yet? The CAT S61?  This we have to find out. The cat s61 an upgrade of the cat s60. Two years later, Bullit the company that manufactures Cat Phones has really advanced the technology in its phones such that It got our tongues wagging.


Below we get to into details that make us say that Cat s61 seams as the most advanced rugged phone yet. The phone which starts shipping form 10th July is now on pre-order on their website.

The features that stood out are:

  • Integrated Thermal Imaging Camera
  • Indoor Air Quality monitor
  • Laser Assisted Distance Measure

Indoor Air Quality monitor

The cat s61 comes with an application called Air which is intended to provide visualization of indoor air quality over time. It helps you be aware of exposure to Volatile organic compounds or air pollutants in your environment. This helps you to take quick steps like opening doors or windows, Turning on air conditioning or even taking a break from the room. This is most important to people who work with paints in a construction site or chemicals in a lab. Sometimes you might get


Laser Assisted Distance Measure

let’s say you need to estimate how many tiles or flooring materials you need to purchase for a room you are remodeling open measure and place your phone flat and square against the first wall you would like to measure from and make sure you are careful not to shine the laser in your eye when you turn the phone around to take the measurement simply push either the up or down volume button you will know that the measurement is captured when the laser turns off the distance is displayed on the left side of the screen repeat with the adjacent wall multiply the two distances and you will get the floor area.

in addition to measuring distance you can also take measurements from within a photo you just captured or one you have already taken saved in the measure gallery options are area triangle or line measurements let’s look at an area to estimate an area within an image for example if you are looking to tile a specific section of a wall use the square area measurement option hold the device parallel to the target wall and capture an image then select the area measurement option a green box will appear use your finger to drag the corners to fit the area you want to measure a magnified view of each corner will help you fine-tune the point you have selected the distance of each length is shown along the line with area shown in the middle you can change the units of measure in the settings menu if you’d like to refer back to the measurement later save the image and the area measurement markings will be imprinted remember you can only accurately apply area measurements to surfaces that are the same distance away as the initial measurement target so if you measure the distance to a wall you can then add area estimates to any section of that wall in the image that you would not be able to measure the height or size of anything on a different wall or surface.

thermal Imaging Camera

to view and edit thermal images you have taken you can either access the thermal gallery through the link on the thermal camera or use the my FLIR gallery app from here you can scroll left and right through your thermal images or select the grid view icon to view them in a gallery grid select an image to open it you can use the image to read different temperatures of anything within the photo using spot meter or area average tools again you can apply up to three moveable spot meters to measure temperatures within the captured image this will allow you to go back to investigate previous hot and cold spots to help you assess whatever situation you are in with an image selected swipe up from the bottom or down from the top to see the standard visual image behind the thermal view this can help give context to complex images

CAT S61 thermal-imaging camera can be used to measure temperatures to picky accurate to within a few degrees you can measure temperatures between minus 20 degrees Celsius up to 120 degrees Celsius or with the high temperature mode enabled sometimes called low gain mode right up to 400 degrees Celsius to measure temperatures and live view open the my FLIR app once initialized point the camera at the object you wish to measure the surface temperature if you’re likely to need to take a measurement over 100 to 20 degrees Celsius select the flame icon at the top of the screen to enable the high temperature mode otherwise ensure it is disabled shown with the line through it for the most accurate results then select the spot meter icon to reveal a submenu of measurement tools and select it again this will add a spot mix to the screen that shows the surface temperature of that point either point the cameras that the spot need to target the object or tap and drag the spot meter to another point on the screen you can add up to three spot meters to remove them tap and hold on any measurement to on the screen and a pop-up menu will appear either delete that individual tool or all of them you can also add a small scalable region of interest bucks or a box that covers the whole screen by selecting the small or large box measurement icons to resize the small region of interest bucks simply tap and drag from any of its corners these boxes show the average temperatures across the area of the image tap and hold on the edges of the box to bring up a pop-up menu from here you can delete the box and you can also add minimum and maximum temperature data labels if that is of interest you can capture an image with measurement tools in place or you can add them to a thermal image you captured earlier to do this find the image you want to add measurements to in the my FLIR gallery then select the Edit pencil icon you’ll then see controls to add spot meters and region of interest boxes to the image just as in the live view add the tools you want and tap save to keep them if you wish to switch the unit of measurement from degrees Celsius to degrees Fahrenheit in the live camera view select the menu icon in the topleft corner then the Settings icon from this menu you can toggle the temperature units between Celsius and Fahrenheit

cat S61 review

Check Price on Amazon


Add comment

Leave a Reply

Follow us

Don't be shy, get in touch. We love meeting interesting people and making new friends.

Email Newsletter

MailChimp newsletter form can be embedded here!

For more info, please visit MailChimp documentation.


Tough Devices for Tough People

We are Social People.

Please Follow us on social media

%d bloggers like this: